![]() The AF-950WM has a silent 1 HP induction motor with alu fan cooling. With the optional dual 100 mm outlet fitting with cover, you can connect the collector to 1 or 2 machines. The 255 mm spiral rotor provides a large extraction to the canister filter (up to six times the surface area of a filter bag) to extract wood chips and dust from table saws, band saws, planers or sanders - 1350 m³/h with a 100 mm outlet. The canister filter with residual bag filters all dust down to a size of 1 micron, so you maintain a clean workplace and optimal air quality. The Dusty AF-950WM wall-mounted dust collector is perfect for small shops that have limited floor space. The Air Flux Separator creates a cyclonic airflow that causes most wood dust particles and other materials heavier than air to separate, preventing them from entering the vacuum. The base with five swivel castors makes it exceptionally stable and easy to manoeuvre around the workshop. The separator captures sawdust, wood chips and other debris before it enters the dust collector, preventing loss of suction power due to a clogged filter. The 99 litre metal container has a level window, quick release hinges and castors. The Air Flux dust separator is designed to expand the capacity of almost any conventional dust collector and turn it into an efficient dust collection system. The Dusty 6000AF dust extractor is standard equipped with a quick-clip system to quickly and easily change the waste bags. The turbine is equipped with a steel propeller and has a steel exhaust (1x150mm) with a reduction in PVC to 3x100mm. ![]() ![]() Thanks to the wheeled base, the vacuum can easily be used throughout the entire workshop. This dust collector is equipped with a 3 HP induction motor with alu protection cap delivering an air flow of 3900m3/hour. Optionally there is also a Canister filter cartridge available that further purifies the air up to 0.5µm. The Dusty 6000AF dust extractor has two fibre filter bags at the top that stops fine dust particles. ![]() Furthermore, the vacuum cleaner is equipped with 8 filter bags (5 microns) above and 3 residual bags with a 600 mm diameter below. The sturdy sheet steel construction weighing 250 kg accommodates a three-phase 400 V motor, which generates an output of 7.5 HP and features a large propeller with a speed of 1440 rpm (instead of the usual 2880 rpm), which provides very quiet extraction. The Air Flux® Dusty AF-7000-DC is an industrial dust extractor with large collection capacity and low noise level. Air Flux Dusty AF-7000-DC Dust extractor - 400 V 7.5 HP removeĪir Flux Dusty 6000AF Dust Extractor - 230V 3HP removeĪir Flux Separator - dust separator (99 litres) removeĪir Flux Dusty AF-950WM Dust Extractor - 230 V 1 HP removeĪir Flux Dusty AF-1500MDC Metal dust collector - 400V 2HP removeĪir Flux AF3900MCZ1 dust extraction ATEX - 400V remove ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |